Muffler Tools
Showing all 13 results
-
Muffler Tools
Garneck 2Pcs Muffler Exhaust Wash Plug Silicone Universal Car Exhaust Silencer Tail Tip Pipe Cover for Motorcycle Dirt…
Muffler ToolsGarneck 2Pcs Muffler Exhaust Wash Plug Silicone Universal Car Exhaust Silencer Tail Tip Pipe Cover for Motorcycle Dirt…
Make sure this fits by entering your model number.
Decor the car tail pipe, make your car looks more beautiful and superior.
Protect the original car exhaust pipe, save your money. There is no need to spend extra money to change the tail pipe any more.SKU: n/a -
Muffler Tools
J-B Weld ExhaustWeld 2″ x 72″ Repair Wrap, White
Make sure this fits by entering your model number.
J-B Weld Exhaustweld: A High Strength Fiberglass Wrap, Impregnated With A Specially Formulated Resin For High Temperature Resistant Repairs. Exhaustweld Can Resist Up To 1100°F Once It Is Fully Cured
Cure And Set Time: Exhaustweld Can Cure With Or Without Heat! It Will Cure Within 20 Minutes If Heat Is Applied To It With Either A Heat Gun Or By Letting The Engine Run. Without Heat, Exhaustweld Will Set In 20 Minutes And Cure In 2 HoursSKU: n/a -
Muffler Tools
J-B Weld FiberWeld 2″ x 36″ Automoitve Repair Cast, Black (38237)
Make sure this fits by entering your model number.
FIBERWELD AUTOMOTIVE REPAIR CAST: A high-strength fiberglass wrap, impregnated with a specially-formulated resin for automotive repairs. When activated by water, the product forms a strong, permanent bond that hardens like steel in 15 minutes. Once cured, FiberWeld is temperature resistant up to 400°F and holds water pressure up to 100 PSI.
SOAK IT, WRAP IT, DONE: Once the wrap is dipped in water for 5-7 seconds, FiberWeld Automotive Repair Cast has a working time of about 5 minutes and a cure time of 15 minutes! The product achieves full strength in about 2 hours.SKU: n/a -
Muffler Tools
Mallofusa 3Pcs Exhaust Pipe Expander Tool Set Kit Muffler Tail Pipe Butt 1-1/8″ to 3-1/2″ with Blow Mold Storage Case
Muffler ToolsMallofusa 3Pcs Exhaust Pipe Expander Tool Set Kit Muffler Tail Pipe Butt 1-1/8″ to 3-1/2″ with Blow Mold Storage Case
Make sure this fits by entering your model number.
For fitting aftermarket components to standard exhausts. Used to expand a length of pipe in equal proportions so the pipe is the same diameter and not tapered.
This Tail Pipe Expander set is designed to quickly and easily straighten clamp dents in mufflers and tail pipes. A Simple Wrench Turn Expands Pipe for Exhaust System Repair & Installation.SKU: n/a -
-
Muffler Tools
OEMTOOLS 27045 Tailpipe Cutter, Features Pipe Cutter Chain w/ Cutting Wheels, Exhaust Pipe Cutter w/ Cushion Grips, Can…
Muffler ToolsOEMTOOLS 27045 Tailpipe Cutter, Features Pipe Cutter Chain w/ Cutting Wheels, Exhaust Pipe Cutter w/ Cushion Grips, Can…
Make sure this fits by entering your model number.
CUT ON OR OFF THE VEHICLE: Get a clean cut with minimal rough edges or burrs on your exhaust pipe, tailpipe, and when installing or making repairs on catalytic converters; Keep well oiled, not for use on stainless steel
EFFECTIVELY CUT TAILPIPES: Work on tailpipes and exhaust pipes with diameters ranging from 3/4″ to 3-1/4″ (19-83 mm); Lubricating the exhaust cutter cutting wheels before use will give an even smooth cutting operation and extends the life of the itemSKU: n/a -
-
Muffler Tools
Powerbuilt Small Tailpipe Expander 1-1/8 Inch to 1-3/4 Inch – 940377
Make sure this fits by entering your model number.
SPECIALTY TOOL: The Small Tailpipe Expander Set expands exhaust pipes, rounds pipe ends, and removes exhaust clamp grooves
WORKS ON: The small expander works on pipes with internal diameters of 1-1/8 inch to 1-3/4 inchSKU: n/a